G45-1610 Garrett G-Series II Supercore 0.85ar 79mm-98mm 89mm-82mm 84T
Garrett G45-1610 G-Series II Supercore
(Standard Rotation Supercore only – turbine housing not included)
Power Rating: 750hp – 1610hp
Recommended Engine Displacement: 2L – 8L
Bearing System: Ball Bearing
Lubrication: Water and Oil
Compressor
Inducer: 79mm, Exducer: 98mm, Trim: 65, A/R: 0.85
Turbine
Inducer: 92mm, Exducer: 82mm, Trim: 84
Original price was: $6,036.00.$5,735.00Current price is: $5,735.00.
Garrett G-Series II – Power of Legends, Durability of Champions
Product Features:
• Up to 10% higher compressor flow compared to G-Series Gen I at peak pressure ratio and peak turbo RPM.
• New compressor aero technology increases power and performance.
• Direct upgrade path for Gen I customers with just a CHRA purchase.
• G-Series II utilizes Gen I compressor and turbine housings.
• Increased efficiency at high flow rates.
• Standard and reverse rotation configurations.
• Inconel turbine wheel.
• Stainless steel turbine housing.
• High efficiency ceramic ball bearing cartridge.
• Oil restrictor and water fittings included.
Product Notes:
Calibration is required to take advantage of increased flow for a horsepower upgrade.
WARNING: The use of this product above max turbocharger speed is at the owner’s risk, and can result in damage and premature failure. To protect the turbocharger from overspeed when operating, a speed sensor port is machined into the compressor housing for the fitment of speed sensor part numbers G781328-0003 (includes sensor and gauge), G781328-0004 (includes speed sensor), or G-Smart Bluetooth Module with sensor (G923586-0003).
Sensor Kits sold separately.